Skip to content
Black Friday Sale: up to 35% off sitewide Ends Mon, Nov 30

Cart

Your cart is empty

Metal Bed Frames

A metal bed frame is a bed built on a steel or iron structure rather than a wooden one, which lets it carry the same load through a thinner profile. These run 81 to 93 inches long and 61 to 84 inches wide in queen, king and California king, with headboards 28 to 78 inches high.

Sort by

17 products

Save $22525975755Upholstered Platform Bed, King, Ivory Canvas Wingback259757562597575725975758
Upholstered Platform Bed, King, Ivory Canvas Wingback Sale price$885 Regular price$1,110
(5.0)
Save $95California King Platform Bed with Under Bed Storage, White25969244259692452596924625969247
Save $22025969304King Platform Bed Frame with Tall Chenille Headboard259693052596930625969307
King Platform Bed Frame with Tall Chenille Headboard Sale price$865 Regular price$1,085
Save $150Corduroy Upholstered King Bed Frame with Iron Base, Cream25969371259693722596937325969374
Save $195Olive Green Velvet California King Bed Frame25975779259757802597578125975782
Olive Green Velvet California King Bed Frame Sale price$770 Regular price$965
(5.0)
Save $21525975588Ivory Boucle Bed Frame, King, 54 in Tall Headboard259755892597559025975591
Ivory Boucle Bed Frame, King, 54 in Tall Headboard Sale price$860 Regular price$1,075
(4.7)
Sold outSave $195California King Boucle Upholstered Bed Frame, White25975889259758902597589125975892
California King Boucle Upholstered Bed Frame, White Sale price$780 Regular price$975
Save $21025975641Chenille Upholstered King Bed Frame, 54-Inch Wingback Headboard259756422597564325975644
Save $21525975662Upholstered King Bed Frame, Ivory Canvas, 54 in Headboard259756632597566425975665
(5.0)
Save $22025975572Ivory Canvas Upholstered King Bed Frame with 52-Inch Headboard259755732597557425975575
Save $205King Velvet Canopy Bed with Upholstered Headboard, Beige25971794259717952597179625971797
Sold outSave $205King Boucle Upholstered Bed Frame with Thick Headboard, White25975793259757942597579525975796
Save $195White boucle platform bed with curved headboard and neutral bedding on a soft blush studio backdropWhite boucle platform bed with rounded headboard in a bright bedroom with walnut nightstands and a lake viewWhite Boucle California King Platform Bed with Headboard2597580725975808
Sold outSave $90Rattan Headboard Bed Frame with LED Light and Storage Shelf25980113259801142598011525980116
Sold outSave $105California King Rattan Bed Frame with LED Light and Shelf25980133259801342598013525980136
Save $24025986756Espresso Queen Murphy Cabinet Bed with Storage Drawers259867572598675825986759
Espresso Queen Murphy Cabinet Bed with Storage Drawers Sale price$945 Regular price$1,185
Save $23025986318Queen Murphy Cabinet Bed with Storage Drawers, White259863192598632025986321
Queen Murphy Cabinet Bed with Storage Drawers, White Sale price$895 Regular price$1,125

Why choose a metal bed frame?

Metal carries load through a thinner section than wood, so a metal frame gives you the same support with less bulk in the room. It also will not split at the bolt holes, which is where wooden rails eventually fail after a few moves. The trade is noise: metal joints move against each other and that is what a squeak is.

What sizes are here?

This collection is queen, king and California king. The frames measure 81 to 93 inches long and 61 to 84 inches wide, with the spread coming from headboard thickness and rail design rather than from mattress size. A queen mattress is 60 by 80 inches, a king 76 by 80, and a California king 72 by 84, so check the frame footprint against the room rather than the mattress.

How do you put a metal bed frame together?

Lay out every part before you start and identify the head rail, foot rail and two side rails. Bolt the side rails to the head and foot loosely, with every bolt started by hand, then square the frame on the floor and only then tighten. Tightening as you go is what leaves a frame out of square. Fit the centre support and its legs before dropping in the slats.

How do you stop a metal bed frame squeaking?

A squeak is almost always metal moving on metal at a joint, not the mattress. Work through the bolts and tighten every one, since a single loose bolt lets the whole frame flex. If it still sounds, put a washer or a strip of felt between the rail and the bracket to break the contact, and check the centre leg is actually touching the floor and taking weight.

Headboards and materials

Headboards run 28 to 78 inches high, so this collection covers everything from a low platform to a tall four poster. Many pair a metal frame with an upholstered headboard in velvet, boucle, chenille or corduroy, and some use rattan or solid wood. Height matters against the wall behind it: measure to the window sill before choosing anything over about 50 inches. Construction: engineered wood and MDF inside some upholstered headboards.

Taking one apart to move

Metal frames come apart in reverse order and travel flat, which is one of their practical advantages over a solid wood bed. Strip the slats first, then the centre support, then loosen all the rail bolts before removing any of them so the frame does not bind. Bag the bolts and tape the bag to a rail, because replacement hardware is rarely a standard size.

Do you need a box spring?

Not with a slatted platform frame, which supports a foam, hybrid or latex mattress directly. Check the slat spacing before ordering: gaps wider than roughly three inches let a foam mattress sag between the slats and will shorten its life. A box spring is only needed on an open rail frame with no slat deck.

Specifications

Frame material
Steel or iron
Mattress sizes
Queen, King, California king
Frame length inches
81 to 93
Frame width inches
61 to 84
Headboard height inches
28 to 78
Headboard materials
Upholstered, Velvet, Boucle, Chenille, Corduroy, Rattan, Solid wood
Construction
Engineered wood and MDF inside some upholstered headboards
Box spring required
No
Features
Platform slat support, Under bed storage on select models
Free shipping
Free
Delivery window
5 to 7 days

Good to know

Frequently asked questions

How do you put together a metal bed frame?
Lay every part out first and identify the head rail, foot rail and two side rails. Start all the bolts by hand and leave them loose, square the frame on the floor, then tighten. Tightening as you go is what leaves a frame out of square and rattling. Fit the centre support and its legs before adding the slats.
How do you take apart a metal bed frame?
Work in reverse: slats first, then the centre support, then the rails. Loosen every rail bolt before removing any of them, or the frame binds and the last bolt will not turn. Bag the hardware and tape it to a rail, because metal frame bolts are often not a standard size and are hard to replace.
How do you stop a metal bed frame from squeaking?
Tighten every bolt first, since one loose bolt lets the whole frame flex and rub. If the noise remains, put a washer or a felt strip between the rail and the bracket to separate the two metal faces. Check that the centre leg reaches the floor and is carrying weight rather than hanging just above it.
How do you attach a headboard to a metal bed frame?
Most metal frames have two pre drilled brackets at the head end. Line the headboard legs up behind them, start both bolts by hand, then tighten evenly so the headboard sits square to the wall. If the bracket holes do not line up, they are usually slotted for height adjustment rather than fixed.
Do you need a box spring with a bed frame?
Not with the platform frames in this collection, which have a slat deck built in and support a foam, hybrid or latex mattress directly. Check slat spacing before ordering, because gaps wider than about three inches let a foam mattress sag between them. A box spring is only needed on an open rail frame with no slats.
How wide is a king bed frame?
A king mattress is 76 inches wide, but the frame around it is wider. The king frames in this collection measure up to 84 inches across once the rails and headboard posts are counted. Measure the doorway and the wall using the frame width rather than the mattress width, particularly on an upholstered headboard.