96-Bottle Wine Rack, 8-Tier Stackable Modular Pine, Natural

Very strong but 2 issues. Certain bottles (mostly long neck & pudgy) do not fit in rack, though this is true of most racks of this type. Also, one must be careful to place the bottle all the way back to make sure it is solidly on the rear support, The unit is otherwise very flexible and useful as you can split this into 2 or more smaller units. The bamboo wood is extremely strong and well engineered. I shortened my unit by one row and used the shelf in my kitchen pantry (I also lowered the row by cutting the supports on a table saw so it sat lower on the shelf. )

Easy to put together and easy to use. Strong and Sturdy. Functional but not display worthy unless plain and functional is the aesthetic. I bought it to go inside a bar that no one will really see. They are not meant to be on display, they are not ugly, but they are not as pretty as one of my metal wine racks. I bought 2 and I think they are great.

Packaged well. Easy to assemble. Sturdy. Fits easily on one side of our utility closet. Holds lots of bottles and larger bottles can sit on top. Great value and a wonderful storage solution!

It’s great. I just got it and it took about 10 minutes to put it all together. Make sure you check each groove to make sure it’s secure at each level before moving on. I loaded it up with about 75 bottles of all kinds of wine and they all fit and it feels secure. Some of the wider champagne bottles took a little wiggle to get it in, but they all fit.

This was exactly what I was looking for. I bought two of these to stack. They are a replacement for some wine cubes that were definitely in decay. These are quite sturdy, feel really solid even before the bottles are loaded. Given the height of the stack, I did secure them from behind, in my case by attaching them to some other racks. (They are essentially the end-cap of a larger installation) I did this at several points from about the middle of the stack to the top of the stack. And symmetrically on each side. In a more straightforward situation, secure them to a wall, being sure that they are securely attached to the studs. They are not at all shaky, just that they are tall, narrow front to back, and heavy. Also, the hardware for this is not included, I just improvised with some hardware I had lying around, but do figure it out before building, and definitely before loading. On a flat level floor, you probably do not necessarily need to secure a single rack to the wall, but be sure that running into it and toppling something is not possible, and load the bottom before the top. Assembly is fast, easy, and self-explanatory. The joints are anywhere from pretty tight to slightly loose. A rubber-headed mallet was useful for some of them I also used a small amount of wood glue in some of the looser joints. Not strictly necessary, but very little reason not to. As to what fits, there is some misleading info in the reviews. Standard-sized Bordeaux and Bordeaux fit equally well, each uses one slot, and you can mix and match as needed. Oversized bottles such as Champagne, or heavy Burgundy shaped bottles do not fit. except possibly on the top level. Heavy Bordeaux shaped bottles may or may not fit. In rows populated by standard Bordeaux bottles, it is possible to add long/thin 375's in the gaps between the 750's. Standard 375's do not generally fit this way. You can also stack a few layers on the top shelves, but I recommend this only if the rack is secured to the wall and if you can reach it without standing on anything. So in summary, these are sturdy, efficient in terms of bottles per length of wall, stack very well, and are definitely designed for installation by amateurs with common sense. Also very fairly priced compared to everything else I looked at. So far, highly recommended.

This is just what i needed to clean up my wine/liquor in my pantry. It is slim and well made. Easy to put together and so for seem very sturdy. Only negative is some of the bottles that have a wider base does not fit so they have to be on top. It works well and was exactly what i was expecting.

Ours is the "Upgrade" version, and is actually a surprisingly good wine rack and a good value. The pieces are accurately made, and fit together so smoothly and snugly that they don't just fall together: That also means it's not going to fall apart! It's reasonably attractive, even though it's going to be in a cool, dark room. I ordered multiples and an earlier version mis-shipped, but didn't know it 'til I got them assembled. The upgrade really does make a difference in a how the neck rests and therefore how securely the bottle rests, and it also allows slightly larger bottles (becoming more common for Pinot's and other reds). It's not gonna work for champagne or other oversized bottles, except for a few on the top layer... but it's a great rack for more standard sized whites and reds.